The kitchen lights work, but the bedrooms are dark. Or the lights are on, but the furnace, dryer and well pump won’t start. A partial power loss is confusing, and sometimes it’s a sign of a serious problem.
Here’s how to figure out what’s going on, what you can safely check yourself, and when to call for help.
Step 1: Is it just you?
Look outside or check with a neighbor. If they’re out too, it’s a utility outage. Salem-area homes served by Liberty can report an outage on Liberty’s site. Eversource customers should use Eversource’s outage center. Liberty’s own guidance says that if your neighbor still has power, check your breaker panel or fuse box first.
5 common causes of partial power loss
- A tripped breaker. The simplest fix. Open your panel and look for a breaker sitting in the middle or “off” position. Push it fully off, then back on. If it trips again right away, stop and call an electrician.
- A tripped GFCI. One GFCI outlet can protect several others downstream, including bathrooms, the garage, the basement and outdoor outlets. Check every GFCI for a tripped RESET button.
- A loose or failed connection. A loose wire at an outlet, switch or splice can kill power to everything past that point. This is often paired with flickering or warm cover plates. It is a fire risk and needs a professional.
- Losing one “leg” of your service. Homes get two 120-volt legs. If one fails, about half your circuits go dead and 240-volt appliances like the dryer, well pump and electric heat stop working. Storm damage to the service drop, meter or main connections is a common cause.
- A loose or damaged neutral. If lights get unusually bright on one side of the house and dim on the other, or bulbs and electronics burn out, you may have a neutral problem. This can damage electronics quickly. Turn off sensitive equipment and call for help right away.
When it’s an emergency
Call an electrician immediately, or your utility if wires are down, if you notice:
- Lights brightening and dimming, or burning out
- A burning smell, scorch marks, or a warm or buzzing panel
- A damaged service mast, meter or wire to the house after a storm
- Breakers that won’t stay on
If you see a downed wire, stay far away and call 911 and your utility.
TMB Electric’s 24/7 emergency electricians serve Salem and all of southern New Hampshire. We can repair storm-damaged service equipment and coordinate with the utility to get you reconnected.
Preventing the next one
Repeated partial outages often point to an aging electrical system. Depending on what we find, a longer-term fix may include:
- An electrical panel upgrade to replace a worn or problem panel
- Whole-house rewiring for homes with older wiring and loose connections
- A Kohler standby generator so the next storm outage doesn’t leave you in the dark
Get answers fast
Don’t keep resetting a breaker that won’t hold. Contact TMB Electric for troubleshooting and repairs and we’ll find the cause and fix it safely.






